Charnwood 1624V Electronic Variable Speed Swivel Head Woodturning Lathe Package

• EXCITING NEW LATHE
• Cast Iron lathe bed
• 240 volt Electronic Variable Speed motor
• Integrated inverter for speed control
• Digital speed readout
• 36 position indexing
• Forward & Reverse
• M33 x 3.5mm headstock thread
• 2mt headstock and tailstock tapers
• Turn Bowls up to 28″
• Extension Bed Available
• Turn Spindles up to 46″

Power is supplied to the lathe through a standard 240v plug. An inverter then converts to 3 phase electricity to feed the motor. The advantage of this system is to allow very fine control of the rotation speed and keep the same high level or torque, even at the lowest speed of just 100rpm. A digital display gives an accurate speed reading at all times.

The headstock on this lathe can be positioned anywhere along the length of the bed and rotated around to any angle, so that a convenient position can always be found for any bowl turning project. The Tool rest has an extension arm and can be positioned on either side of the headstock. You can therefore turn bowls in 2 different ways: over the bed or in front of the bed.

All three elements: headstock, tool rest & tailstock, slide along the bed and are locked into place with a strong cam lock lever, fitted with a comfort grip.

The cast iron floor stand ensures vibration free running, has brackets should you wish to attach a storage shelf, and has floor fixing points. There is also a tool storage rack to keep all the accessories handy and ready to use.

Supplied with drive centre, tail centre, 150mm diameter faceplate, knock out bar, floor stand, cable and plug.

The optional extension bed can be used to further increase the capacity of the lathe. It can be mounted in 2 ways:
For spindles, In line mounting extends the maximum spindle length to 1150mm (46″)
For bowls, Leg mounting allows clearance for bowls of up to 700mm (28″) diameter

• Distance between centres – 600mm (24″)
• Distance over bed – 400mm (16″)
• Motor  – 240 volt 2hp with 3phase inverter
• Speed Ranges – 100 to 3000 rpm
• Spindle Thread Size – M33 x 3.5mm
• Spindle Tapers – 2MT
• Indexing Positions – 36
• Dimensions mm (W x D x H) – 1400 x 500 x 1200mm
• Dimension inches (W x D x H) – 55″ x 20″ x 48″
• Weight – 132kg
• Rating – Light Trade
• 5 Year Guarantee